Documents that are going to be attached to Landonline must be created in a Landonline-compatible TIFF format. If you receive an error message when attaching a document, you will need to recreate the document in the required format.
To assist with this, we have provided a special print-to-TIFF driver that will allow you to create a TIFF image file from your own application software - without the need to print and scan the document. To do this you will need to install the following Landonline Print-to-TIFF driver.
(Bear in mind that if you only have a paper original of the document you will still need to scan it. In this case you will need to ensure that your scanner settings are compatible with Landonline requirements. Refer to the Landonline scanning requirements for these requirements.)
Before you begin installation, you may want to print this page for reference.
We also recommend you save and close any documents you may have open before you start.
| How To Download and Install the Print-to-TIFF Driver | |
|---|---|
| Purpose | Install the Landonline Print-to-TIFF driver that allows documents and images to be converted to a Landonline-compatible format. |
| Step | Description |
|---|---|
| 1 |
|
| 2 |
|
| Note | We recommend using the "Save to disk" option as it means that you will not need to download the installation file a second time if you need to reinstall this software on your computer or another computer in the organisation. |
| 3 |
|
| 4 |
|
| 5 |
|
| 6 |
|
| 7 |
|
| 8 |
|
| 9 |
|
| 10 | You should see the Landonline printer (the print-to-TIFF driver) in your Printers folder.
|
| 11 | To create TIFF images that are compatible with Landonline, use the print-to-TIFF driver as though it is a printer:
|
